Comments on: Digicrystal 9000 PVR & Digital Set Top Box Review & FAQ http://www.bhatt.id.au/blog/digicrystal-9000-pvr-digital-set-top-box-review-faq/ Technology Reviews, Personal Finance, Movies and TV Shows, Politics, Environment, Books... Fri, 30 Jul 2010 02:47:59 +1000 http://wordpress.org/?v=2.8.4 hourly 1 By: Frank http://www.bhatt.id.au/blog/digicrystal-9000-pvr-digital-set-top-box-review-faq/#comment-25213 Frank Wed, 09 Jun 2010 13:14:23 +0000 http://www.bhatt.id.au/blog/digicrystal-9000-pvr-digital-set-top-box-review-faq/#comment-25213 I have a Digicrystal 9000 which I fixed a number of years ago by changing the capacitors. I now have this problem. When first turned on the remote works (change channels etc) but after about a minute the remote (with new batteries) stops working. I can still change channels using buttons on the unit itself. I presume something must be wrong with the sensor circuitry. Anyone else had this problem or can suggest how to fix. I have a Digicrystal 9000 which I fixed a number of years ago by changing the capacitors.
I now have this problem.
When first turned on the remote works (change channels etc) but after about a minute the remote (with new batteries) stops working.
I can still change channels using buttons on the unit itself.
I presume something must be wrong with the sensor circuitry.
Anyone else had this problem or can suggest how to fix.

]]> By: Amak http://www.bhatt.id.au/blog/digicrystal-9000-pvr-digital-set-top-box-review-faq/#comment-24484 Amak Mon, 10 May 2010 13:25:40 +0000 http://www.bhatt.id.au/blog/digicrystal-9000-pvr-digital-set-top-box-review-faq/#comment-24484 @Charles, Please check your firmware version. I recently purchased a RIMTEL 160gb pvr (today actually) It runs of the Digi firmware (another rebadge?) However unlucky me the firmware it says I have is the E 3.41B which from everything I've read states that it thinks its just a standard stb instead of a pvr (to which I plan to return the product tomorrow abit peeved) Please check your firmware version. Also does anyone have anymore information on firmware versions? As I said mine is a E/3.41b dated 2006 06 15 and boot loader S 1.8. @Charles,

Please check your firmware version. I recently purchased a RIMTEL 160gb pvr (today actually) It runs of the Digi firmware (another rebadge?) However unlucky me the firmware it says I have is the E 3.41B which from everything I’ve read states that it thinks its just a standard stb instead of a pvr (to which I plan to return the product tomorrow abit peeved)

Please check your firmware version.

Also does anyone have anymore information on firmware versions? As I said mine is a E/3.41b dated 2006 06 15 and boot loader S 1.8.

]]> By: Andy http://www.bhatt.id.au/blog/digicrystal-9000-pvr-digital-set-top-box-review-faq/#comment-20978 Andy Wed, 03 Feb 2010 08:08:34 +0000 http://www.bhatt.id.au/blog/digicrystal-9000-pvr-digital-set-top-box-review-faq/#comment-20978 Hi I am after some assistance with my STB.It has been working fine until recently. The module is LHD2 and the issue is, when I switch the box on the LED reads 8888 with the indicator lights all on. There is no signal at the TV. I have tried to reset the box disconnecting the power and when its reconnected the same LED come on? Could you please help or indicate where I could seek assistance with this problem. Hi I am after some assistance with my STB.It has been working fine until recently. The module is LHD2 and the issue is, when I switch the box on the LED reads 8888 with the indicator lights all on. There is no signal at the TV. I have tried to reset the box disconnecting the power and when its reconnected the same LED come on? Could you please help or indicate where I could seek assistance with this problem.

]]> By: rod http://www.bhatt.id.au/blog/digicrystal-9000-pvr-digital-set-top-box-review-faq/#comment-20713 rod Thu, 28 Jan 2010 07:01:29 +0000 http://www.bhatt.id.au/blog/digicrystal-9000-pvr-digital-set-top-box-review-faq/#comment-20713 gday, im lost!!!!! ive got a strong top box,SRT 4652, it has been working fine until recently. its basic, just going from dish to unit, then the tv. to do a manual scan what satellite, frequency, symbol rate and polarization do i need? all im getting at the moment is NITV and shopping channels!!!!!!!!!!! help, thanks, rod gday, im lost!!!!! ive got a strong top box,SRT 4652, it has been working fine until recently. its basic, just going from dish to unit, then the tv. to do a manual scan what satellite, frequency, symbol rate and polarization do i need? all im getting at the moment is NITV and shopping channels!!!!!!!!!!! help, thanks, rod

]]> By: Jessy http://www.bhatt.id.au/blog/digicrystal-9000-pvr-digital-set-top-box-review-faq/#comment-20649 Jessy Sun, 24 Jan 2010 10:01:12 +0000 http://www.bhatt.id.au/blog/digicrystal-9000-pvr-digital-set-top-box-review-faq/#comment-20649 Hi, I own a digicrsytal 9000PVR digital set top box and my remote has stopped working. I was wondering where i could get a replacement~ I brought it online a few years ago and couldn't remember the site i brought it from.. But after reading the posts, i thank you, as now i know! Hi,
I own a digicrsytal 9000PVR digital set top box and my remote has stopped working. I was wondering where i could get a replacement~ I brought it online a few years ago and couldn’t remember the site i brought it from.. But after reading the posts, i thank you, as now i know!

]]> By: rossco http://www.bhatt.id.au/blog/digicrystal-9000-pvr-digital-set-top-box-review-faq/#comment-19046 rossco Wed, 21 Oct 2009 09:00:45 +0000 http://www.bhatt.id.au/blog/digicrystal-9000-pvr-digital-set-top-box-review-faq/#comment-19046 have 2 unused digicrystal pvr 9000 remotes if helps tracy and razzer rossco. have 2 unused digicrystal pvr 9000 remotes if helps tracy and razzer rossco.

]]>